Evinrude 4906B 4HP 1969 Owner's Manual page 121

4-30 FUEL
10- If the carburetor
fuel filter bowl, turn the locking disc hold-
ing the glass bowl to the carburetor
TERCLOCKWISE, and then move the hanger
clear of the bowl. Remove the bowl.
11- Remove the
filter, and gasket from the carburetor.
12- Remove the bowl gasket
carburetor. Remove the gasket from the
high-speed nozzle.
nozzle from the carburetor
size screwdriver to prevent possible damage
to the nozzle. If difficulty is experienced
in removing the high-speed nozzle, leave it
in place. When the carburetor
in the carburetor
nozzle will be cleaned sui table for further
ser vice.
13- Work the hinge pin free of the float
and then remove the float.
14-
Remove the inlet needle valve from
the seat. Remove the seat and gasket from
the carburetor.
Further disassembly of the carburetor
not necessary.
has an attaching
COUN-
center screw, washer,
from
Remove the high-speed
using the proper
is immersed
cleaner the high-speed
the
is