Evinrude 4906B 4HP 1969 Owner's Manual page 135

4-44 FUEL
SPECIAL NOTE:
As the needle valve
take care to retain the washer, a-ring,
spr ing installed between
valve and the carburetor.
spring will be used again.
be discarded.
4- Remove the five screws securing the
carburetor to the intake
that four of the screws have slots and one is
a countersunk screw.
from the engine.
5- Remove the four screws securing the
float bowl, and then remove the float bowl.
6- Remove and DISCARD
ket.
7- Remove the hinge pin, and then lift
the float assembly
body.
is
being removed,
and
the E-r ing on the
The washer and
The O-ring may
manifold. Notice
Lift the carburetor
the bowl gas-
from the carburetor
BOWL