Evinrude 4906B 4HP 1969 Owner's Manual page 125

4-34 FUEL
the nozzle seats in the bowl of the carbure-
tor and burrs on the nozzle will result in
fuel leakage, or the bowl will NOT fit prop-
er ly onto the carburetor.
4-
Install a NEW gasket over the nozzle.
Force the gasket down onto the carburetor
stem.
5- Place a NEW gasket in position on the
the carburetor base.
install a used gasket at this location. As the
gasket is used, the low-speed hole has a
tendancy to shrink slightly and prevent suf-
ficient fuel f rom passing through.
fore, the need for installation
gasket each time the carburetor is serviced.
NEVER attempt to
There-
of a new