9
Press the [3] key (COPY SPACE).
COPY SPACE setting screen is displayed.
10
Press the POSITION (
setting value.
11
Confirm the setting and press the POSITION ( ) key
(PREVIOUS).
Copy space will be selected, and it will return to COPY MODE screen.
12
Confirm the setting and press the [ENTER] key (SET).
"COPY" is displayed on the screen, and it will copy as much as
specified.
) key and increase or decrease the
4-13
Supplement
Copy interval can be set when MEDIA
CHANGE MODE is turned off.
Copy space can be set from 1.0 mm to 10.0
mm.
This setting is maintained even if the power
is turned off.
Supplement
Cutting data is stored even if the media is
exchanged. It can be copied as many times
until the buffer memory is cleared. It can be
copied again after exchanging the media by
pressing [COPY] key.