GRAPHTEC CE6000-120AP User Manual page 42

10
Pull from the front of the machine to even the tension of both
A and B sides of the paper, as shown in the figure below.
11
Raise the set lever after confirming that the route the roll
paper passes through is taut and not slackening. The push
roller position and the roll paper will stay in place.
12
Lowering the lever releases the stopper lock.
Lever
Media set lever
2-13
CAUTION
During a plotting or cutting operation, be sure
to keep your hands, hair, and so forth away
from the media stocker and collar.