GRAPHTEC CE6000-120AP User Manual page 132

4
Press the [4] key (INITIAL BLADE).
INITIAL BLADE CONTROL POSITION setting screen is displayed.
5
Press the [1] key (OUTSIDE) or the [2] key (2mm BELOW).
6
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to TOOLS SETTING screen (3/3).
7
Press the [PAUSE/MENU] key.
It will return to default screen.
Supplement
It will return to TOOLS SETTING screen (3/3)
without changing the settings when you press
the POSITION ( ) key (CANCEL).
6-13