Prior To Use; Notes On The Basket; Notes On The Paper (Media) - GRAPHTEC CE6000-120AP User Manual

Cutting plotter
Hide thumbs Also See for CE6000-120AP:
Table of Contents

Advertisement

• Be sure to read the attached TO ENSURE SAFE AND CORRECT USE prior to use. Otherwise, it may
cause an unexpected accident or fire.
If the supplied basket is not used, problems in cutting quality may occur. Be sure to use the basket.
Please use the paper (media) in accordance with the following precautions.
• The paper is sensitive to temperature and humidity, and can start to stretch or contract immediately upon
removal from the roll. Cutting/plotting the media immediately after taking it off causes it to stretch and may
blur or cause deviations in the images.
• Please make sure to store the paper at the same environment (temperature/humidity) as this machine.
• Please always line up the edge of the paper.
Misalignment may cause skewing and mis-cuts.
• About the end of the roll media and the paper roll.
The cutting or plotting may differ depending on how the roll media ended or how the paper roll was stopped.
• About the paper roll.
This machine uses rolls with an internal diameter of 3 inches, or 76.2 mm. Mis-cuts or plotting deviations
may occur if the paper roll is warped or has a larger internal diameter.
• Please make sure to use the Paper Exposure Time and Number of Pre Feeds settings.
The media can start to stretch or contract after it is taken off the roll. Changes in temperature and/or humidity
affect the paper's contractibility and saturation time, and may cause mis-cuts or plotting deviations.
To prevent this from occurring, this machine is preset for Paper Exposure Time at 180 seconds, and
Number of Pre Feeds at 2. For details on how to change these settings, see "Setting Paper Exposure Time"
and "Setting the Number of Pre Feeds" in Section 4.
• Using the thin media (70 g/m
When the cutting speed is too fast, the media deviations may occur. Reduce the cutting speed to use the
thin media.
Especially, please reduce the cutting speed in low humidity environment.

Prior to use

Notes on the basket

Notes on the paper (media)

2
)
IV

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CE6000-120AP and is the answer not in the manual?

Questions and answers

Table of Contents