Setting The Space Rear - GRAPHTEC CE6000-120AP User Manual

4
Press the [2] key (PAPER READY TIME).
PAPER REDY TIME setting screen is displayed.
5
Press the POSITION (
setting value.
6
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to MEDIA SETTING screen (3/3).
7
Press the [PAUSE/MENU] key.
It will return to default screen.

Setting the space rear

This setting allows a cross cut to be made from the maximum value of the cut along the X axis based on the rear
margin setting during time out or when making a cross cut across a separator.
Operation
1
Press the [PAUSE/MENU] key in READY status.
MENU screen is displayed.
2
Press the [4] key (MEDIA).
MEDIA SETTING screen (1/3) is displayed.
3
Press the POSITION ( ) key.
MEDIA SETTING screen (3/3) is displayed.
) key and increase or decrease the
4-9
Supplement
Paper exposure time can be set to 0, 60, 120,
180, 300, 420, or 600 seconds.
Supplement
Press the POSITION ( ) (CANCEL) key to
return to the MEDIA SETTING screen (3/3)
without changing any settings.
Supplement
Perform the settings in Normal menu.
For the READY status, see "How to Use
Control Panel" .
P.2-21