GRAPHTEC CE6000-120AP User Manual page 25

5
Insert the 4 short sheet supporting pipes into the supporting
pipe plate from the end without an end plug.
In the front side of the main assembly insert the pipe into the
upper side, and insert it into lower side in the rear side. The
short sheet supporting pipe ends should now extend out from
the front end of the main assembly.
Sheet supporting pipe (short)
End plug
6
Insert one middle length sheet supporting pipe and 2 long
sheet supporting pipes in to the basket.
Please insert 1 middle length sheet supporting pipe into the
middle of the basket.
Sheet supporting pipe (middle)
Sheet supporting pipe (long)
End plug
Joint
Joint
End plug
End plug
Basket
Sheet supporting pipe (short)
Joint
Sheet supporting pipe (short)
1-8
End plug
Joint
Supporting pipe plate
Sheet supporting pipe (long)
End plug