About The Default Screen - GRAPHTEC CE6000-120AP User Manual

2.5

About the Default Screen

The Initial Setup Screen appears only when powering up the machine for the first time after purchase. Here, you
can set the display language and length unit.
You can also enter the menu select from the READY status after a setup.
P.9-2 Display Language Settings (LANGUAGE SELECTION)
P.9-3 Display Length Unit Settings (LENGTH UNIT)
See "2.6 Connecting to the Power"
Operation
1
Once the machine is powered on (with the " | " switch) a
message will be displayed after the version is displayed.
Here, PLEASE DISPLAY LANGUAGE setting screen is displayed.
2
Use the POSITION (
(This manual assumes you chose the English language
setting.)
3
Press the [ENTER] key.
After the DISPLAY LANGUAGE is selected, the LENGTH UNIT screen
will appear.
4
Press the [1] key (METRIC) or the [2] key (INCH) to select the
length unit setting.
5
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to default screen.
P.2-20 for turning on the power.
) keys to select the language.
2-19
Supplement
The default value for the command setting is
HP-GL, and the origin position is lower left.