GRAPHTEC CE6000-120AP User Manual page 208

7
Confirm that operation area of tool and media is safe.
8
Press [1] key (DONE).
CUT DEMO is started.
9
When you start a cutting, TEST screen (1/2) is displayed.
10
Press the [PAUSE/MENU] key.
It will return to default screen.
Do not place your hand around the moving
areas. The tool carriage will start moving, so
there is a chance of injury.
Supplement
Press [2] key (CANCEL) to return to the TEST
screen without outputting the CUT DEMO.
Supplement
During operation, the keys on the control panel
do not work. When the CUT DEMO output is
finished, they are active.
12-20
CAUTION