GRAPHTEC CE6000-120AP User Manual page 162

6
Press the POSITION (
setting value.
7
Confirm the setting and press the POSITION ( ) key
(PREVIOUS).
BAUD RATE will be set, and it will return to RS-232C setting screen.
8
Press the [2] key (DATA BIT).
DATA BIT setting screen is displayed.
9
Press the [1] key (8 BIT) or the [2] key (7 BIT).
DATA BIT will be set, and it will return to RS-232C setting screen.
10
Press the [3] key (PARITY).
PARITY setting screen is displayed.
11
Press the [1] key (NONE), [2] key (EVEN), or the [3] key (ODD).
PARITY will be set, and it will return to RS-232C setting screen.
12
Press the [4] key (HANDSHAKE).
HANDSHAKE setting screen is displayed.
) key and increase or decrease the
8-6
Supplement
Match the setting value of the application to be
used.
Supplement
Match the setting value of the application to
be used.
It will return to RS-232C setting screen
without changing the settings when you
press POSITION ( ) key (PREVIOUS).
Supplement
Match the setting value of the application to
be used.
It will return to RS-232C setting screen
without changing the settings when you
press POSITION ( ) key (PREVIOUS).