Contents(目次) Specifications(総合仕様 - Yamaha Steinberg MR816SCX Service Manual

Advanced integration dsp studio
Table of Contents

Advertisement

MR816CSX/MR816X
SPECIFICATIONS
Electrical Characteristics
Sample Rate
Total Harmonic Distortion
Frequency Response
(CH IN to LINE OUT)
Dynamic Range
(SN ratio at the maximum level)
Hum & Noise
(20 Hz−20 kHz)
Rs = 150 Ω
Maximum Voltage Gain
Crosstalk @ 1 kHz
Input and Output Specifi cations
Analog Input
MIC/LINE/HI-Z jack 1,
MIC/LINE jack 2 and MIC/LINE IN
jacks 3 − 8 (CH1 − 8)
INSERT I/O jack 1 and 2 (INSERT IN) TRS phone type, unbalanced
Analog Input
OUTPUT jacks 1 − 8
(Line Output)
INSERT I/O jack 1 and 2
(INSERT OUT)
Headphone jacks 1 and 2
(Monitor 1/2)
General Specifi cations
Power Requirements
Dimensions (H x D x W)
Net Weight
Operating Free-air Temperature Range
Included Accessories
4
Internal
44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
External
44.1kHz, 48kHz, 88.2kHz, 96kHz (± 0.1%)
GAIN: Minimum
0.004% or less (1 kHz @ +18 dB, into 600 Ω)
fs = 48 kHz
20 Hz−20 kHz, +1, -3 dB @ +4 dB, into 600 Ω
fs = 96 kHz
20 Hz−40 kHz, +1, -3 dB @ +4 dB, into 600 Ω
104 dB, DA converter (LINE OUT)
97 dB, AD + DA (to LINE OUT)
-118 dB, Equivalent input noise
-86 dB, Residual output noise, Output fader: Minimum
GAIN: Maximum
-86 dB (90 dB SN), LINE OUT
PAD: OFF
Output channel fader: Nominal, All Input channel faders: Minimum
GAIN: -60 dB
-53 dB (57 dB SN), LINE OUT
PAD: OFF
Output channel fader: Nominal, Input channel fader (one channel): Nominal
84 dB, CH1 − 8 to LINE OUT
GAIN: Minimum
-85 dB, CH1 − 8
Adjacent Input
Type
XLR type balanced,
+48 V Phantom powered
Type
TRS phone type, balanced
TRS phone type, unbalanced
TRS phone type, unbalanced
Input Level
Nominal Level
Maximum Level
-60 dBu to +10 dBu
0 dBu
Output Level
Nominal Level
Maximum Level
+4 dBu
+4 dBu
4 mW + 4 mW
25 mW + 25 mW
12 mW + 12 mW
75 mW + 75 mW
40 W (PA-30)
44 x 305 x 480 mm
3.2 kg
+5 − +35
AC power adaptor (PA-30 or equivalent)
DVD-ROM (Cubase AI 4)
CD-ROM (TOOLS for MR)
Getting Started manual (printed booklet)
IEEE1394 cable
Rubber stoppers x 4
Input Impedance
+24 dBu
3.5 kΩ
+14 dBu
10 kΩ
Input Impedance
+18 dBu
600 Ω
+18 dBu
10 kΩ
8 Ω
40 Ω

Advertisement

Table of Contents
loading

This manual is also suitable for:

Steinberg mr816x

Table of Contents