System Settings - Yamaha POCKETRAK PR7 Owner's Manual

System settings

Here you can make settings for the device
itself.
1.
With the power turned off, hold down
[REC SET] and turn the power on.
NOTE
When the PR7 starts up, release the power but-
ton. If you continue holding it, the power will turn
off.
2.
Use the [+] and [–] but-
tons to select a system
setting menu item.
Resetting the calendar
1.
Use the [+] and [–] buttons to select
"CAL" (calendar), then press the [
(Play) button.
2.
Make settings as described in the pro-
cedure on page 10.
2: Power on
(Press and hold down
this button.)
1: While pressing and holding
down this button
]
Resetting the menu
1.
Use the [+] and [–] buttons to select
"rESEt" (reset), then press the [
(Play) button.
2.
At the confirmation screen, use the [<]
and [>] buttons to select "y" (Yes),
then press the [
3.
After the setting process is
complete, press the [■] (Stop)
button.
The PR7 calls up the HOME
screen.
NOTE
Data stored in the built-in memory and on a
microSD card will not be initialized, nor will calen-
der settings be initialized.
System settings
]
] (Play) button.
Owner's Manual
25