Basic Settings (Standard Mode); Selecting The Operation Mode (Standard Mode) - Yamaha CS1D Owner's Manual

Control surface digital audio mixing system
Hide thumbs Also See for CS1D:
Table of Contents

Advertisement

Basic settings (Standard mode)

x1
x1
DSP
When starting up the PM1D system for the first time, you will need to select the operation mode of the PM1D (which is
what determines the system configuration and how the components are connected to each other), and set the word clock
that will be shared by the entire system. Once these settings have been made, the PM1D system will automatically
remember them. (However if you modify the configuration of the system, you may need to make settings again.)
Be aware that the display screens and settings differ between Standard mode and Mirror mode. This section explains the
basic settings for Standard mode. If you are using Mirror mode, please proceed to "Basic settings (Mirror mode)"
( p.26).

Selecting the operation mode (Standard mode)

The "operation mode" determines the configuration of the PM1D system and how the components are connected to
each other. The PM1D system version 1.0 supports two modes: "Standard mode" in which one console is used with one
engine, and "Mirror mode" in which one console is used with two engines.
[Procedure]
1. In the LED FUNCTION ACCESS block, press the
[SYS/W.CLOCK] switch several times to access the
screen shown on the following page.
LCD FUNCTION ACCESS
block
[SYS/W.CLOCK] switch
Hint
The switches of the LCD FUNCTION ACCESS block
are used to access specific functions in the display. By
pressing the same switch repeatedly, you can succes-
sively access different screens within that function.
22

Advertisement

Table of Contents
loading

Table of Contents