Sound Module Mode (Mode) - Yamaha MU100 Owner's Manual

Sound Module Mode (MODE)

This lets you select the operating mode of the MU100. Press the MODE
button, then use the SELECT </> buttons to select the desired Sound
Module mode: XG, TG300B, C/M (Computer Music) or PFM (Per-
formance). If XG, TG300B or C/M are selected, the MU100 auto-
matically sets itself to the Multi mode. When PFM is selected, the
MU100 is in the Performance mode. (See page 22.)
The bottom right of the display indicates the currently selected Sound
Module mode.
Arrow indicates selected Sound Module mode.
Press the EXIT button (or any one of the other mode select buttons: PLAY,
EDIT, UTIL, EFFECT or EQ) to use the MU100 in the current mode.
NOTES
• When the MU100 is not set to the XG mode and an XG System On message
• In the C/M mode, the Voices available in Parts 11 - 16 are different from those
• The TG300B mode also has multiple banks. In the C/M mode, there is only
156
is received, the MU100 changes to the XG mode after a slight pause of 0.5
seconds.
available in Parts 1 - 9. (Refer to the "Sound List & MIDI Data" booklet.)
one bank ("Fix" appears at the Bank Number parameter), and for the drum
Part only one drum kit can be selected.
Sound Module Mode (MODE)
XG
TG300B
C/M
PERFORM