Copy Measure - Yamaha QY-8 User Manual

The Option Functions
5.
Move the cursor across to the number of measures parameter and
use the [-1] and [+1] buttons to specify the number of measures
you want to create (1 ... 99).
6.
Press [ENTER] to create the specified measures. "Completed" will
appear briefly on the display and the Create Measure function will
automatically be exited when the specified number of blank
measures have been created. You can exit without executing the
Create Measure function by moving the cursor up to the
OPTION pointer.
Use create measure when you want to add new material some-
where in the middle of data you've already recorded, without
MUSICAL
erasing the existing data. First create the required measures, then
NOTE
either copy the data from existing measures using the Copy Meas-
ure function, or record new data as required.
Use the [ U N D O ]
Measure function if you accidentally create measures in the wrong
place.
HINT

Copy Measure

Copies a specified range of measures from one track to the specified
measure in another track. This operation overwrites the data from the
beginning of the specified destination measure with the data from the
source measure. Previous data in the overwritten measures is therefore
lost.
1.
With the cursor at the OPTION pointer use the [-1] and [+1]
buttons to select "CpyMeas" on the display.
2.
Press [ENTER] to call the first Copy Measure parameters (the
copy-from part parameter will be automatically selected).
54
[ U N D O ] key immediately after executing the Create [ U N D O ] [ U N D O ]
[ U N D O ]