Configuration Parameter Name
The following parameters are available in Auto provisioning menu:
Service
Certificate
Certificate Expiry
Using the debug mode
About this task
Use this procedure to activate or deactivate the debugging options.
Before you begin
You must set a HTTP server in the BRURI parameter in the Settings file that is capable of
receiving a phone report from the phone. BRURI parameters can receive only phone report. It has
no effect on any other debugging setting.
Procedure
1. Press Main Menu > Administration.
2. In the Access code field, enter the admin menu password.
3. Press Enter.
4. Select Debug.
The phone displays the following debug options:
• Serial port mode
• Port mirroring
• Phone report
• SSH access
• SSH fingerprint
• Clear SSH lockout
• Service mode control
• Service mode record
5. Use the appropriate keys to enable or disable the options.
6. Press Save.
April 2020
Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
Configuring the phone using Administration menu
Description
Specifies option for auto provisioning. Press Toggle
to choose the required option :
• Inactive
• Active
Specifies if the certificate is available.
Specifies the expiry date of the certificate. The
available format is DD-MMM-YYYY
environment
81