Avaya J100 Series Installing And Administering page 417

Parameter name
PROVIDE_KEY_REPEAT_DELAY
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
Default value
0
environment
List of configuration parameters
Description
Specifies how long a
navigation button must be
held down before it begins
to auto-repeat, and if an
option is provided by
which the user can change
this value.
Value operation:
• 0: Default (500ms) with
user option (default).
• 1: Short (250ms) with
user option.
• 2: Long (1000ms) with
user option.
• 3: Very Long (2000ms)
with user option.
• 4: No Repeat with user
option.
• 5: Default (500ms)
without user option.
• 6: Short (250ms) without
user option.
• 7: Long (1000ms)
without user option.
• 8: Very Long (2000ms)
without user option.
• 9: No Repeat without
user option.
Note:
Avaya J129 IP
Phonedoes not
support this feature.
Table continues...
417