Avaya J100 Series Installing And Administering page 489

</PhoneNumbers>
</DirectoryEntry>
Example of a complete .xml file
<IPPhoneDirectory>
<!-- Contact with lastname, firstname and three phone numbers with different types --
><DirectoryEntry>
<LastName>Lastname1Lastname1Lastname11234</LastName>
<FirstName>Firstname1Firstname1Firstname11234</FirstName>
<Phone>
</PhoneNumbers>
</DirectoryEntry>
</IPPhoneDirectory>
PHONEKEY parameter values
This section contains the full list of PHONEKEY parameter values and their definition.
The common syntax for the PHONEKEY parameter is the following:
SET PHONEKEY "Key=1;Type=feature;Name=autocallback"
where
Type, Name and Label can take other values. Label is used for localization purposes and
accepts non-Latin symbols as valid values. For the full list of allowed values, refer to the table
below. For additional settings of the PHONEKEY parameter and the details on its syntax, refer to
the Additional parameters column.
Note:
The features supported only in the Broadsoft environment are marked with one asterisk (*).
The features supported in both the Broadsoft and Asterisk environments are marked with
double asterisk (**).
The unmarked features are supported in all the Broadsoft, Asterisk and 3CX environments.
April 2020
</Phone>
<Phone>
<Number>613967504021212121</Number>
<Type>Other</Type>
</Phone>
<PhoneNumbers>
<Phone>
<Number>6139675040212121212</Number>
<Type>Work</Type>
</Phone>
<Phone>
<Number>613967504021212121</Number>
<Type>Home</Type>
</Phone>
<Number>613967504021212121</Number>
<Type>Mobile</Type>
</Phone>
<Phone>
<Number>613967504021212121</Number>
<Type>Other</Type>
</Phone>
Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
environment
PHONEKEY parameter values
489