Avaya J100 Series Installing And Administering page 80

Phone configuration
4. Select IP Configuration > Ethernet IPv4.
The phone displays the parameters for IP configuration.
IP configuration field description
Configuration Parameter Name
The following parameters are available in Ethernet IPv4 menu:
Use DHCP
Phone
Gateway
Mask
The following parameters are available in VLAN menu:
802.1Q
VLAN ID
VLAN Test
The following parameters are available in the Servers menu:
HTTP server
HTTPS server
DNS server
SNTP server
STUN server
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
Description
Specifies the access to view or manually enter the
IP address.
Select one of the following:
• YES: Selects the DHCP option to view the IP
addresses.
• No: Selects the DHCP option to enter the IP
addresss.
Specifies the IP address of the phone. The
available format is nnn.nnn.nnn.nnn.
Specifies the gateway of the phone. The available
format is nnn.nnn.nnn.nnn.
Specifies the network mask. The available format is
nnn.nnn.nnn.nnn.
Choose one of the following options:
• Auto: Automatic mode.
• On: Turns on the configuration.
• Off: Turns off the configuration.
Specifies the ID for VLAN. The available format is
dddd.
Specifies the time in seconds, the phone waits for
the DHCP server response. The available format is
ddd.
Specifies the IP address of the HTTP file server.
The available format is nnn.nnn.nnn.nnn.
Specifies the IP address of the HTTPS file server.
The available format is nnn.nnn.nnn.nnn.
Specifies the IP address of the DNS server. The
available format is nnn.nnn.nnn.nnn.
Specifies the time server settings.
Specifies the STUN server settings.
environment
Table continues...
80