Using The Debug Mode - Avaya J129 Installing And Administering

Configuration Parameter Name
VLAN ID
VLAN Test
The following parameters are available in Servers menu:
HTTP server
HTTPS server
DNS server
SNTP server

Using the debug mode

About this task
Use this procedure to activate or deactivate the debugging options.
Before you begin
You must set a HTTP server in the BRURI parameter in the Settings file that is capable of
receiving a phone report from the phone.
Procedure
1. Press Main Menu > Admin.
2. In the Access code field, enter the admin menu password.
3. Press Enter.
4. Select Debug.
The phone displays the following debug options:
• Phone Report
• Port Mirroring
• SSH
• SSH fingerprint
• Svc control
• Svc record
September 2017
Description
Specifies the ID for VLAN. The available format is
dddd.
Specifies the time in seconds, the phone waits for
the DHCP server response. The available format is
ddd.
Specifies the IP address of the HTTP file server. The
available format is nnn.nnn.nnn.nnn.
Specifies the IP address of the HTTPS file server.
The available format is nnn.nnn.nnn.nnn.
Specifies the IP address of the DNS server. The
available format is nnn.nnn.nnn.nnn.
Specifies the time server settings.
Installing and Administering Avaya J129 IP Phone
Comments on this document? infodev@avaya.com
Using the debug mode
61