Avaya J100 Series Installing And Administering page 202

Feature and application configuration
Parameter
BLF_LIST_URI
CALL_PICKUP_BARG
EIN_FAC
CALL_PICKUP_FAC
CALL_PARK_FAC
CALL_UNPARK_FAC
April 2020
Default Description
value
None Specifies a unique name for the BLF list of users that you want to
monitor on the phone.
In the Broadworks environment, this is a mandatory parameter
for the BLF feature.
The BLF_LIST_URI parameter is not available in the 3CX
environment.
In the Asterisk environment, you can either set BLF_LIST_URI
or, if this parameter is not set, the phone reads the BLF value in
the PHONEKEY parameter and assigns BLF lines with individual
subscriptions to specified phone extensions.
The BLF resource list has the following format:
• sip:[list name]@[domain] or
• <list name>
For example,
SET BLF_LIST_URI sip:mylist1@devices.avaya.com
SET BLF_LIST_URI sales
*33 Specifies the feature access code of Directed Call Pickup with
Barge-In.
*97 Specifies the feature access code of Directed Call Pickup to pick
up a call for a BLF user.
*88 Specifies the feature access code to park a call to a monitored
line.
Null Specifies the feature access code to unpark a call for a BLF user.
Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
Note:
Depending on the environment, to set this parameter, you
must create a BLF URL on the Broadworks web portal or
configure Resource List Subscription in the pjsip.conf
file on the Asterisk server. For more information, see
Broadworks configuration guide and Asterisk Project
documentation.
Note:
This parameter is supported only in the Broadworks
environment.
environment
Table continues...
202