Avaya J100 Series Installing And Administering page 266

Security configurations
Parameter
MYCERTWAIT
MYCERTCAID
SCEPPASSWORD
April 2020
Type Default
value
Numeric 1
String CAIdenti
fier
String $SERIA
LNO
Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
Description
Specifies the functions of the device when performing
certificate enrolment. The options are:
• 0: Periodical check in the background
• 1: Wait until a certificate or a denial is received or a
pending notification is received
Specifies the Certificate Authority Identifier. Certificate
Authority servers might require a specific CA Identifier
string to accept GetCA requests. If the device works with
such a Certificate Authority, the CA identifier string can
be set through this parameter.
Specifies a challenge password to use with SCEP. The
value of SCEPPASSWORD, if non-null, is included in a
challengePassword attribute in SCEP certificate signing
requests.
If the value contains $SERIALNO, $SERIALNO is
replaced by the value of SERIALNO. If the value contains
$MACADDR, $MACADDR is replaced by the value of
MACADDR without the colon separators.
environment 266