Using The Debug Mode - Avaya J100 Series Installing

Configuration Parameter Name
VLAN ID
VLAN Test
The following parameters are available in Servers menu:
HTTP server
HTTPS server
DNS server
SNTP server
The following parameters are available in Auto provisioning menu:
Service
Certificate
Certificate Expiry

Using the debug mode

About this task
Use this procedure to activate or deactivate the debugging options.
Before you begin
You must set a HTTP server in the BRURI parameter in the Settings file that is capable of
receiving a phone report from the phone. BRURI parameters can receive only phone report. It has
no effect on any other debugging setting.
Procedure
1. Press Main Menu > Administration.
2. In the Access code field, enter the admin menu password.
3. Press Enter.
4. Select Debug.
December 2018 Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
Description
• Off: Turns off the configuration.
Specifies the ID for VLAN. The available format is
dddd.
Specifies the time in seconds, the phone waits for
the DHCP server response. The available format is
ddd.
Specifies the IP address of the HTTP file server.
The available format is nnn.nnn.nnn.nnn.
Specifies the IP address of the HTTPS file server.
The available format is nnn.nnn.nnn.nnn.
Specifies the IP address of the DNS server. The
available format is nnn.nnn.nnn.nnn.
Specifies the time server settings.
Specifies option for auto provisioning. Press Toggle
to choose the required option :
• Inactive
• Active
Specifies if the certificate is available.
Specifies the expiry date of the certificate. The
available format is DD-MMM-YYYY
Using the debug mode
147