Avaya J100 Series Installing And Administering page 393

Parameter name
MP_GROUPS_TO_SEND
MP_CODEC
MP_PACKET_SIZE
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
Default value
Null
1
20
environment
List of configuration parameters
Description
Defines the list of Multicast
Paging groups which the
phone can send pages to.
Priority is not set for these
groups. A maximum of 10
paging groups can be
listed.
The paging groups should
be separated with a
comma (","), and should
be listed in the following
format:
IP:port:label
IP, Port, and Label
denote the same as the
corresponding
MP_GROUPS_TO_LISTE
N values. All these
settings are required.
For example,
SET MP_GROUPS_TO_SEND
"239.0.0.0:1208:Sales,
239.1.2.3:1210:Team"
Specifies a codec which
will be used to code and
decode Multicast Paging
transmissions.
Valid values:
• 1: G.729 codec is used.
• 2: G.711u codec is used.
• 3: G.711a codec is used.
Specifies the size of an
RTP packet in
milliseconds. The valid
values are 10 through 80.
The value must be valid
for the selected codec and
therefore must not be
changed unless
necessary.
Table continues...
393