Avaya J100 Series Installing And Administering page 456

Customizable parameters
Parameter name
SLMSRVR
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
Default value
Null
environment
Description
Specifies the IP address
and the port number of the
SLA Mon server in the
aaa.bbb.ccc.ddd:n format.
Set the IP address of the
SLA Mon server in the
aaa.bbb.ccc.ddd format to
restrict the registration of
agents only to that server.
Specifying a port number
is optional. If you do not
specify a port number, the
system takes 50,011 as
the default port. If the
value of the port number is
0, than any port number is
acceptable.
The IP address must be in
the dotted decimal format,
optionally followed by a
colon and an integer port
number from 0 to 65,535.
To use a non-default port,
set the value in the
aaa.bbb.ccc.ddd:n format,
where aaa.bbb.ccc.ddd is
the IP addressof the SLA
Mon server.
Note:
If default port is not
used, both the SLA
Mon agent and
server must be
configured with the
same port.
SLMSRVR impacts
the phone's SLA Mon
agent configuration.
A corresponding
configuration must
also be made on the
SLA Mon server
agentcom-
slamon.conf file.
Table continues...
456