Restarting The Phone; Configuring Wi-Fi Using Phone Ui - Avaya J100 Series Installing And Administering

Phone configuration
020
Null

Restarting the phone

Procedure
1. Press Main Menu > Admin.
2. In the Access code field, enter the admin menu password.
3. Press Enter.
4. Select Restart phone.
5. Press Restart when the phone prompts for confirmation.
A restart does not affect user-specified data and settings, such as contact data or the
phone login and password.

Configuring Wi-Fi using phone UI

About this task
Use this procedure to configure a Wi-Fi network by using phone UI. Note that switching networks
causes a reboot of the phone.
Procedure
1. Navigate to Main Menu > Administration.
2. In the Access code field, enter the administration password.
The default access code is 27238.
3. Press Enter.
4. Select Network Interfaces.
5. Use the right arrow key to change Network mode to Wi-Fi.
6. Configure the following parameters:
• Network config: Specifies if the WLAN is connected automatically or manually.
April 2020
1
1
Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
Call X from Contacts list
Call X from Contacts list
environment
Phone sends an invite
message with
2741018989 and does
not insert the local area
code.
Phone sends an invite
message with
2741018989 and does
not insert the local area
code.
86