Avaya J100 Series Installing And Administering page 315

Parameter name
BUTTON_MAPPINGS
BW_ENABLE_DIR
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
Default value
Null
1
environment
List of configuration parameters
Description
Specifies a list of Button
and Status pairs that
change the operation of
some of the buttons on the
phone.
Button and Status pairs
are separated by commas
without any intervening
spaces.
Valid button values are
Forward, Speaker,
Hookswitch, and Headset.
Valid Status values are na
and cc-release.
Value operation:
• na: The corresponding
button is disabled.
• cc-release: Button
invokes the cc-release
feature.
• null: All buttons operate
normally.
Specifies if directory
contacts are available for
processing.
Value operation:
• 0: Directory contacts are
not processed and
directory sources are not
displayed to the user.
• 1: Directory contacts are
processed and directory
sources are displayed to
the user.
Note:
Avaya J129 IP Phone
does not support this
feature.
Table continues...
315