Avaya J100 Series Installing And Administering page 153

Name
HTTP Port
HTTPS Provisioning Server
HTTPS Server Address
HTTPS Server Directory Path
HTTPS Port
Authentication Credentials to Provisioning Server
User Name
User Password
Plug-and-Play (PNP) Provisioning
PNP Configuration
Configuration
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
Configuring the phone using the web interface
Description
Specifies the HTTP port address.
The valid value is an integer from 0 to 65535. The
default port number is 80.
Specifies the IP address of the HTTPS provisioning
file server.
The valid value is the IP address in the dotted
decimal name format, DNS name format or colon-
hex.
The default value is 0.0.0.0.
Specifies the path to the configurations and data
files in HTTPS GET operations during device
bootup. This path is relative to the root of the
HTTPS file server, to the directory in which the
device configuration and date files are stored. If
$MACADDR and/or $MODEL4 and/or $SERIALNO
macro is present in the configured path then such
macro is replaced with its actual value.
The valid value is a string of up to 127 ASCII
characters without spaces. This field is empty by
default.
Specifies the HTTPS port address.
The valid value is an integer from 0 to 65535. The
default value is 443.
Specifies the username for the HTTP Provisioning
Server authentication.
The default value is empty.
Specifies the password for the HTTP Provisioning
Server authentication.
the default value is empty.
Specifies the status of the PNP configuration.
The options are:
• Enabled (default)
• Disabled
environment
Table continues...
153