Avaya J100 Series Installing And Administering page 198

Feature and application configuration
Parameter name
XSI_URL
XSI_CHANNEL_DURATION
XSI_HEARTBEAT
FORCE_XSI_USER_ID
April 2020
Default Value
Null
60
15
Null
Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
Description
Specifies the FQDN or the IP
address, HTTP or HTTPS mode
and the port of the XSP server. If
the value is defined, phone will
initiate XSI connection
establishment to retrieve the
feature list.
Default value: Port 80 is used for
HTTP and port 443 is used for
HTTPS if the port is not defined.
For example: http://
xsp1.iop2.broadworks.net or
http://199.19.193.26
Specifies the time duration in
minutes for XSI event channel.
The phone will ask XSP server to
maintain the established Comet
HTTP connection for the specified
period of time. After 50% of this
time phone will reestablish Comet
HTTP connection.
Valid values are 60 to 1440
minutes.
Specifies the interval in seconds
to send heartbeat messages over
Comet HTTP connection to XSP
server of BroadWorks.
Valid values are 1 to 999
seconds.
Specifies the BroadSoft user ID
which the phone must use for XSI
authentication.
BroadSoft user Id is the SIP user
Id excluding at (@) and domain.
Valid values are 0 to 255 ASCII
characters.
environment
Note:
XSI_HEARTBEAT should
equal to Broadsoft
eventTimeout/2. The
EventTimeout duration can
be viewed in BroadSoft web
interface.
Table continues...
198