Configuring Settings - Avaya J100 Series Installing And Administering

Name
SIP Signaling Port (range)
Miscellaneous
Conference Factory URI
Voice Mail Access Code
100rel
Validate Incoming
messages
'Privacy' header in
Incoming message

Configuring Settings

About this task
In the web interface of the phone, the Settings tab has various sections of the phone settings. You
can configure the required settings for your phone.
When you click on any configuration field, the screen displays the details of that field in the
Parameter Help section.
Procedure
1. Log in to the web interface.
2. In the navigation pane, click Settings.
April 2020
Description
Specifies the port range to be used for SIP signaling.
The valid value is an integer from 32 to 64,511.
The default value is 60473.
Specifies the URI for network conferencing in Open SIP environments.
The valid value is a string of up to 255 ASCII characters.
Specifies the number to access the voice mail in a non-Avaya environment.
Specifies whether the 100rel option tag is included in the SIP INVITE
header field.
The options are:
• Disable: The tag is not included.
• Enable (default): The tag is included.
Specifies whether AOR received in Request-URI of an incoming call must
be validated with the contact header published by phone during
registration.
The options are:
• Disable (default)
• Enable
Specifies whether AOR received in Request-URI of an incoming call must
be private in the contact header published by the phone during registration.
The options are:
• Display CallerID information (default)
• Display 'Restricted'
Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
Configuring the phone using the web interface
environment 125