Avaya J100 Series Installing And Administering page 337

Parameter name
DIRAUTHTYPE
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
Default value
1
environment
List of configuration parameters
Description
Specifies the kind of
authentication that is used
if the value of the
DIRUSERNAME
parameter is not null.
Value operation:
• 0: Simple LDAP
authentication. Normally
the DIRUSERNAME
parameter must contain
a DN name of an LDAP
record, and
DIRUSERNAME must
contain a password
associated with the
record.
• 1: Simple LDAP
Authentication and
Security Layer (SASL).
If a connection is
established over TLS
(DIRSECURE is set to 1
or 2), DIGEST-MD5 or
PLAIN authentication
mechanisms are
supported.
If the connection
established over TCP
(DIRSECURE is set to
0) DIGEST-MD5 is the
only supported
mechanism.
Note:
Avaya J129 IP Phone
does not support this
parameter.
Table continues...
337