Avaya J100 Series Installing And Administering page 382

Customizable parameters
Parameter name
LLDP_ENABLED
LOCAL_DIAL_AREA_CODE
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
Default value
2
0
environment
Description
Specifies whether LLDP is
enabled.
Value operation:
• 0: Disabled
• 1: Enabled
• 2: Enabled, but only
begins transmitting if an
LLDP frame is received.
Specifies if user must dial
area code for calls within
same area code regions.
Value operation:
• 0: User don't need to
dial area code.
• 1: User need to dial area
code. When enabled,
the area code parameter
(PHNLAC) should also
be configured.
Note:
This parameter is
supported when the
phone is failed over.
Table continues...
382