Avaya J100 Series Installing And Administering page 335

Parameter name
DIRUSERNAME
DIRPASSWORD
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
Default value
Null
Null
environment
List of configuration parameters
Description
Specifies the LDAP client
username.
The following characters
are allowed:
• 0–9
• a-z
• A-Z
The preferred way of
configuring this parameter
is through the web
interface.
Note:
Avaya J129 IP Phone
does not support this
parameter.
Specifies the LDAP client
password.
The following characters
are allowed:
• 0–9
• a-z
• A-Z
The preferred way of
configuring this parameter
is through the web
interface.
Note:
Avaya J129 IP Phone
does not support this
parameter.
Table continues...
335