Avaya J100 Series Installing And Administering page 379

Parameter name
L2Q
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
Default value
0
environment
List of configuration parameters
Description
Specifies if layer 2 frames
generated by the
telephone have IEEE
802.1Q VLAN tags.
Value operation:
• 0: Auto - VLAN tagging
is turned on when the
network can support
VLAN tagging and
L2QVLAN is non zero.
• 1: On - VLAN tagging is
turned on when the
network can support
VLAN tagging. The IP
phone sends tagged
frames with VLAN =
L2QVLAN, even if
L2QVLAN is set to 0.
• 2: Off - VLAN
functionality is disabled.
Note:
This parameter can
also be set through:
• Local admin
procedure
• A name equal to
value pair in
DHCPACK
message
• SET command in a
settings file
• DHCP option 43
• LLDP
Table continues...
379