Chapter 10: Sip Server Redundancy Configuration; Sip Server Redundancy; Redundancy In Generic Open Sip - Avaya J100 Series Installing And Administering

Chapter 10: SIP server redundancy

SIP server redundancy

In an Open SIP environment, you can configure Avaya J100 Series IP Phones to connect to one
of the following SIP servers in a redundant mode.
• Generic open SIP - redundant mode is not supported. However, by connecting to one of the
recommended Open SIP servers, you can configure the phone for redundant signaling mode.
• BroadSoft
• Netsapiens
When in redundant mode, the phone uses signaling service from a secondary server if the primary
server is down. The following sections explain how to administer a phone for a redundant
connection in different modes.
Related links

Redundancy in generic Open SIP

Redundancy in a Broadsoft environment
Redundancy in a Netsapiens environment
Redundancy in generic Open SIP
In a generic Open SIP environment, phone connects to the recommended Open SIP server.
Related links
SIP server redundancy
Redundancy parameters - generic Open SIP
Redundancy parameters - generic Open SIP
To configure the phone for redundant signaling mode in a generic Open SIP environment, use the
46xxsettings.txt file to set the following parameters:
April 2020
configuration
on page 276
on page 278
on page 276
Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
on page 280
on page 276
environment 276