Avaya J100 Series Installing And Administering page 203

Parameter
ALLOW_BLF_LIST_C
HANGE
BLF_INCOMING_CAL
L_INDICATION
BLF_PARKED_CALL_
INDICATION
April 2020
Default Description
value
3 Specifies whether a user can add or delete the monitored phone
extensions from the BLF resource list.
Valid values:
0 – The user cannot add or delete monitored phone extensions.
1 – The user can only delete monitored phone extensions.
2 – The user can only add monitored phone extensions.
3 – The user can add and delete monitored phone extensions.
3 Specifies the indication type for a BLF incoming call.
Valid values:
• 0 - None (no alerting for BLF incoming calls).
• 1 - Audible (only audible alerting for BLF incoming calls).
• 2 - Visual (only visual alerting for BLF incoming calls).
• 3 - Default (the behavior isl based on
BLF_INCOMING_CALL_INDICATION_MODE parameter
value).
• 4 - Both (both audible and visual alerting for BLF incoming
calls).
1 Specifies the indication type for a BLF parked call.
Valid values:
• 0 - None (no alerting for BLF parked calls).
• 1 - Default (the behavior based on
BLF_PARKED_CALL_INDICATION_MODE parameter value).
• 2 - Audible (only audible alerting for BLF parked call).
• 3 - Visual (only visual alerting for BLF parked call).
• 4 - Both (default - both audible and visual alerting for BLF
parked call).
Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
Note:
This parameter is supported only in the Broadworks
environment.
Note:
This parameter is supported only in the 3PCC environment.
Note:
This parameter is supported only in the 3PCC environment.
environment
Feature configuration
Table continues...
203