Avaya J100 Series Installing And Administering page 460

Customizable parameters
Parameter name
SOFTKEY_CONFIGURATION
SPEAKERSTAT
SSH_ALLOWED
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
Default value
0,1,2
2
0
environment
Description
Specifies which feature
will show up on which soft
key on the Avaya J129 IP
Phone screens.
The features are defined
as follows:
• 0 = Redial
• 1 = Contacts
• 2 = Emergency
• 3 = Recents
• 4 = Voicemail
Note:
Emergency calls are
not supported in an
Open SIP
environment.
Specifies the operation of
the speakerphone.
Value operation:
0: Speakerphone disabled
1: One-way speaker (also
called monitor) enabled.
2: Full (two-way)
speakerphone enabled.
Note:
Avaya J129 IP Phone
does not support this
feature.
Specifies if SSH is
supported.
Value operation:
0: Disabled
1: Enabled
2: Configured using local
craft procedure. When this
mode is configured, then
by default the SSH server
is disabled.
Table continues...
460