Avaya J129 Installing And Administering
In third-party call control setup
Hide thumbs
Also See for J129:
- Installing and administering (133 pages) ,
- Instructions manual (70 pages) ,
- User manual (61 pages)
Related Manuals for Avaya J129
Summary of Contents for Avaya J129
- Page 1 Installing and Administering Avaya J129 IP Phone in third-party call control setup Release 1.0 Issue 1 November 2017...
- Page 2 RESERVES THE RIGHT TO TAKE LEGAL ACTION AGAINST YOU the express behalf of Avaya. End User agrees to indemnify and hold AND ANYONE ELSE USING OR SELLING THE SOFTWARE harmless Avaya, Avaya's agents, servants and employees against all WITHOUT A LICENSE.
- Page 3 IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION written consent of Avaya can be a criminal, as well as a civil offense FOR H.264 (AVC) AND H.265 (HEVC) CODECS MAY BE under the applicable law.
- Page 4 AC adapters shipped with the equipment or specified by This equipment has been tested and found to comply with the limits Avaya to be used with the equipment. If you use any for a Class B digital device, pursuant to Part 15 of the FCC Rules.
- Page 5 The trademarks, logos and service marks (“Marks”) displayed in this site, the Documentation, Hosted Service(s), and product(s) provided by Avaya are the registered or unregistered Marks of Avaya, its affiliates, its licensors, its suppliers, or other third parties. Users are not permitted to use such Marks without prior written consent from Avaya or such third party which may own the Mark.
-
Page 6: Table Of Contents
Chapter 4: Configuring certificates..................43 Chapter 5: Configuring date and time................... 44 Chapter 6: Cloud configurations................... 46 ..................46 Configuration through a cloud server November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com... - Page 7 Finding documents on the Avaya Support website ....................67 Viewing Avaya Mentor videos ..........................67 Support Chapter 11: Appendix......................68 ....................68 List of configuration parameters November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
-
Page 8: Chapter 1: Introduction
This document contains information about preparing Avaya J129 IP Phone for installation, deployment, initial administration, and administration tasks including data and security. This document is intended for people who install, administer, and maintain Avaya J129 IP Phone. November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup... -
Page 9: Chapter 2: Avaya J129 Ip Phone Overview
Chapter 2: Avaya J129 IP Phone overview Avaya J129 IP Phone overview The Avaya J129 IP Phone is a SIP-based IP phone for unified communications. Avaya J129 IP Phone supports a single line with two call appearances on a dual line display. - Page 10 Mbps) network port. • RJ45 secondary Ethernet (10/100 Mbps) computer port. Power Ethernet • IEEE 802.3at • Single Port PoE injector (SPPoE) November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
-
Page 11: Physical Layout
Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com... - Page 12 If you press + or - on the Volume button on an active call, the phone increases or decreases the volume of your handset, or speaker accordingly. Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
-
Page 13: Connection Jacks
To unmute the call, press the Mute button again. Connection jacks The following image illustrates the connection jacks that are present on the back panel of Avaya J129 IP Phone models. The image schematically describes which device to connect in which jack. November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com... - Page 14 Avaya J129 IP Phone overview Network Computer Handset Port Port Jack November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
-
Page 15: Chapter 3: Initial Setup And Connectivity
Ensure that your network already has the following components installed and configured: • A DHCP server for providing dynamic IP addresses to the Avaya J129 IP Phone. • A file server, an HTTP or an HTTPS for downloading the software distribution package and the settings file. -
Page 16: Installation Checklist
Configuration parameters page 68 Configure the upgrade file Device upgrade process page 41 Install the phone Installing the phone on page 40 November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com... -
Page 17: Phone Deployment In Third-Party Call Control Setup
N e t w o r k configuration Avaya Aura ® F i l e S e r v e r System Manager November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com... -
Page 18: Virtual Lan (Vlan) Overview
VLAN tagged frame. Voice and video traffic typically get a higher priority in the network as they are subject to degradation caused by network jitter and delay. November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com... -
Page 19: Vlan Separation
Virtual LAN (VLAN) overview VLAN separation The Avaya J129 IP Phone has an internal network switch that is capable of using VLANs to segregate traffic between the LAN port, the PC port and the internal port that goes to the CPU of the phone. - Page 20 (PHY 1) (PHY2) ingress egress ingress egress LAN port PC port Internal Ethernet switch CPU port ingress egress Phone's CPU Phone November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
-
Page 21: External Switch Configuration
LAN port if they are untagged frames or tagged frames with VLAN ID= PHY2VLAN. In this mode, there is a complete separation between CPU port and PC port. In order to configure Avaya J129 IP Phone to work in this mode all the following conditions must be met:... -
Page 22: Exceptions To The Vlan Forwarding Rules
VLAN separation mode. In No VLAN separation mode all VLANs passes between LAN and PC port. However, the CPU port in this case receives all traffic even on VLANs which are not equal to L2QVLAN. November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com... -
Page 23: Vlan Parameters
Value operation: • 0: The phone continues to attempt a DHCP REQUEST forever. VLANTEST is configured through: • Settings file Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com... - Page 24 PHY2VLAN Specifies the value of the 802.1Q VLAN ID that is used to identify network traffic going into and Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
-
Page 25: Configuration Through Lldp
Link Layer Discovery Protocol (LLDP) is an open standards layer 2 protocol that IP phones use to advertise their identity and capabilities and to receive administration from Ethernet switches. LAN November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com... -
Page 26: Lldpdu Transmitted By The Phones
Tagging Yes/No, VLAN ID for voice, L2 Priority, DSCP Value. TIA LLDP MED Inventory – MODEL - Full Model Name. Hardware Revision Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com... -
Page 27: Tlv Impact On System Parameter Values
• The VLAN name in the TLV does not contain the substring “voice” in lower-case, upper-case or mixed-case ASCII characters anywhere in the VLAN name. Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com... - Page 28 If TLV = 1, L2Q set to 1 (On). Framing If TLV = 2, L2Q set to 2 (Off). Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
-
Page 29: Tcp And Udp Ports
Network Policy (Voice) TLV. TCP and UDP ports Avaya J129 IP Phone use different protocols, such as TCP, TLS, and UDP to communicate with other equipment in the network. Part of this communication identifies which TCP or UDP ports each piece of equipment uses to support each protocol and each task within the protocol. -
Page 30: Transmitted Packets (Source = Sip Phone)
443, unless explicitly Any unused port number TLS/SSL packets specified otherwise transmitted by the HTTP client of the phone. Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com... -
Page 31: Configuration Through Dhcp
Transmitted signaling protocol packets Configuration through DHCP Avaya J129 IP Phone connect to the DHCP server during the boot up. You can configure the DHCP server to provide the following information to the device: • IP address • Subnet mask •... -
Page 32: Dhcp Options
As an alternative to administering DNS by DHCP, you can specify the DNS server and domain name in the HTTP script file. If you use the script file, you must configure the Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com... - Page 33 Option 43 is processed only if the first code in the Option is 1 with a value of 6889. The value 6889 is an Avaya enterprise number. All values are interpreted as strings of ASCII characters that are accepted with or without a null termination character.
- Page 34 Configure system such that once the IP address is assigned to the device, the device continues using that address after the DHCP lease expires, until a conflict with another device is detected. November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 35 NETMASK Option 1, if received ROUTER Option 3, if received, which might be a list of IP addresses SNTPSRVR Option 42 November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
-
Page 36: Dhcp Site-Specific Option
Controls whether local procedures are enabled. The default is 0 for enabled. REUSETIME Specifies the time in seconds for IP address reuse. The default is 60 seconds. Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com... -
Page 37: Downloading And Saving The Software
1. Go to the Avaya Support website. 2. In the Enter Your Product Here field, enter Avaya J129 IP Phone. 3. In the Choose Release field, click the required release number. 4. Click the Downloads tab. The system displays a list of the latest downloads. -
Page 38: Software Distribution Package
Review the release notes and any Read Me files associated with a distribution package. Ensure that the Settings file is not cached in your browser. To do this, clear the browser cache before downloading the settings file from the Avaya support Web site, so that you don’t get an old version. -
Page 39: Provisioning Server Configuration
Before you begin Get the following items: • J129 wall mounting kit that contains a wall mount bracket, and an Ethernet cable. The part number of the wall mount bracket is 700512707. • Four #8 screws. The screws are not provided with the J129 wall mounting kit. -
Page 40: Installing The Phone
Installing the phone Before you begin You must do the following: • Configure the file server. November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com... -
Page 41: Device Upgrade Process
Device upgrade process 1. During boot-up, the phone receives the file server address from DHCP, LLDP, or the device interface. November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com... -
Page 42: Post Installation Checklist
Administering emergency network. It may be necessary to make numbers arrangements with the appropriate authorities to test this functionality. November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com... -
Page 43: Chapter 4: Configuring Certificates
• SCEP • PKCS12 • Web Server 4. Click one of the following: • Save • Reset to Default • Help November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com... -
Page 44: Chapter 5: Configuring Date And Time
For example, Sun for Sunday, Mon for Monday. - mmm represents a three-character English abbreviation for the month. For example, Jan for January, Feb for February. November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com... - Page 45 • Save: To save the configuration changes. • Reset to Default: To revert to the default values. • Help: To view the online help. November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
-
Page 46: Chapter 6: Cloud Configurations
2. Retrieves and checks the J100Supgrade.txt file for device upgrade if required. 3. Retrieves the 46xxsettings.txt and MACADDR.txt files for customer-specific configurations. November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com... -
Page 47: Settings File Contents On A Cloud Server
• HTTPSRVR with <"”> is the name of the parameter that removes the cached HTTP file server address. This redirects the phone to the cloud service provider’s file server. November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com... -
Page 48: Chapter 7: Security Configurations
Chapter 7: Security configurations Security overview SIP-based Avaya J129 IP Phone provides several updated security features. When the phone is in a locked state, a user can only receive calls or make emergency calls. User logs and data are protected with the user account. -
Page 49: Certificate Management
The identity certificate must be provided and validated by the server to establish mutual authentication. Server must validate the identity certificate to establish a secure connection.. November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com... -
Page 50: Identity Certificates
• Thumbprint: Hash of the certificate • Basic Contraints • Subject Alternative Name • Key Usage Extensions • Extended Key Usage November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com... -
Page 51: Trusted Certificates
• Lifecycle management of identity certificates for elements. • Secure storage of Private Keys. • Issuance of Certificates. • Revocation of Issued Certificates. November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com... -
Page 52: Ocsp Trust Certificates
$MACADDR. If the value includes the string $SERIALNO, that string will be replaced by the phones serial number. Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com... - Page 53 SERIALNO. If the value contains $MACADDR, $MACADDR is replaced by the value of MACADDR without the colon separators. November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
-
Page 54: Chapter 8: Phone Administration
1. Press Main Menu > Admin. 2. In the Access code field, enter the admin menu password. 3. Press Enter. 4. Select IP Configuration > IPv4. November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com... -
Page 55: Ip Configuration Field Description
DNS server Specifies the IP address of the DNS server. The available format is nnn.nnn.nnn.nnn. SNTP server Specifies the time server settings. November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com... -
Page 56: Using The Debug Mode
1. Press Main Menu > Admin. 2. In the Access code field, enter the admin menu password. 3. Press Enter. 4. Select Ethernet interface. November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com... -
Page 57: Setting The Group Identifier
5. Enter any Group value between 0 to 999. When you change the Group value, the phone restarts after you exit the admin menu. 6. Press Save. November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com... -
Page 58: Setting Event Logging
5. Press Restart when the phone prompts for confirmation. A restart does not affect user-specified data and settings, such as contact data or the phone login and password. November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com... -
Page 59: Configuring Sip Settings
The two modes to detect the available environment are as follows: - Auto: Detects the Avaya environment automatically. - No: Does not detect the Avaya environment and switches to a non-Aura mode. Note: Disable the Avaya Environment configuration from the 46xxsettings.txt file. -
Page 60: Setting Site Specific Option Number (Sson)
4. Select SSON. 5. In the SSON field, enter the new SSON. The number must be between 128 to 254. 6. Press Save. November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com... -
Page 61: Using The View Administrative Option
HTTPS Server The list of IP or DNS addresses of TLSSRVR TLS servers for HTTPS file Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com... -
Page 62: Setting The 802.1X Operational Mode
- On: If DOT1X = 0 - On & proxy logoff: If DOT1X = 1 - Off: If DOT1X = 2 November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com... -
Page 63: Resetting System Values
After reset, the phone displays the Log In screen. Note: Avaya J129 IP Phone parameters stored for a particular user are not reflected in other phones, for example, 9600 Series IP Deskphones, even if the SIP user is the same. -
Page 64: Chapter 9: Backup And Restore
Chapter 9: Backup and restore Backup and restore process Avaya J129 IP Phone supports the backup and restore of the user-specific data. The phone supports HTTP over TLS (HTTPS) for backup and restore. The following user-specific data are supported for backup and restore: •... - Page 65 • HTTP server returns the file to the phone. If the automatic restore process fails, the phone displays the following message: Retrieval Failed November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
-
Page 66: Chapter 10: Resources
Use this procedure to find product documentation on the Avaya Support website. Procedure 1. Use a browser to navigate to the Avaya Support website at http://support.avaya.com/. 2. At the top of the screen, enter your username and password and click Login. -
Page 67: Viewing Avaya Mentor Videos
Avaya Mentor videos provide technical content on how to install, configure, and troubleshoot Avaya products. About this task Videos are available on the Avaya Support website, listed under the video document type, and on the Avaya-run channel on YouTube. Procedure •... -
Page 68: Chapter 11: Appendix
AVAYA engineers before making any changes to the values. AUDIOSTHS Specifies the level of side-tone in the handset. Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com... - Page 69 • 0: Disabled • 1: Enabled BRANDING_VOLUME Specifies the volume level at which the Avaya audio brand is played. Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 70 • 0: Both the name and the number will be displayed. • 1: Only the name will be displayed (default). • 2: Only the number will be displayed. Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 71 • For Brazil use keyword Brazil. • For Canada use keyword USA. • For France use keyword France. • For Germany use keyword Germany. Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 72 • Or if it will enter an extended rebinding state in which it continues to use the address and to periodically send a rebinding request Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 73 Specifies a character string that will be appended to parameter values that are specified as DNS names, before the name is resolved. Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 74 DSCPVID Specifies the layer 3 Differentiated Services (DiffServ) Code Point for video frames generated by the phone. Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 75 • 1: Configured for Avaya SES with AST features and PPM. ENABLE_CALL_LOG Species if call logging and associated menus are available on the phone. Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 76 Specifies if the G.711 a-law codec is enabled. Value Operation • 0: Disabled • 1: Enabled ENABLE_G711U Specifies ifr the G.711 mu-law codec is enabled. Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 77 WARNING if there are multiple phones registered on a user's behalf. Value Operation • 0: No • 1: Yes Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 78 Specifies if audio debug recording is enabled for users. Value Operation • 0: Audio debug recording is disabled. • 1: Audio debug recording is enabled. Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 79 Request-URI against AOR and Contact header during phone registration. Value Operation • 0: No validation. • 1: Validates the phone registration. Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 80 Valid values are 0 through 32. Value of 0 means that this timer is disabled. Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 81 999. HANDSET_PROFILE_DEFAULT Specifies the number of the default handset audio profile. Valid values are 1 through 20. Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 82 The value can contain 0 to 255 characters. INGRESS_DTMF_VOL_LEVEL -12dBm Specifies the power level of tone, expressed in dBm0. Values can range from -20dBm to -7dBm. Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 83 Valid values are 0 through 7. Note: This parameter can also be set through: • SET command in a settings file • LLDP Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 84 Sets the prefix for local calls. Permissible values are the Area Code denoted by AC, a string of digits, or the default, DIAL_AS_IS. Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 85 LOCALLY_ENFORCE_PRIVACY_ Specifies whether the phone displays Restricted HEADER instead of CallerId information when a Privacy Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 86 1: Displays the contact name if all the digits of the shorter number match with the right-most digits of the longer number. For example, a 5-digit Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 87 Ethernet switches. MUTE_ON_REMOTE_OFF_HOO Controls the speakerphone muting for a remote- initiated (a shared control or OOD-REFER) speakerphone off-hook. Value Operation Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 88 If the URL is specified in HTTPS, then the HTTPS is used to send the CSR to the SCEP server. Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 89 Specifies that whether a nonce is added in the OCSP requests and expected in the OCSP responses. Value operation: • 0: Not added. • 1: Added. Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 90 Specifies the country code for United States. The value is 1. Valid values 1 to 999. PHNDPLENGTH Specifies the internal extension number length. Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 91 PHNMUTEALERT_BLOCK Specifies if the Mute Alert feature is blocked or unblocked. Value Operation • 0: Unblocked • 1: Blocked Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 92 Specifies the speed and duplex settings for the secondary (PC) Ethernet interface. Value Operation • 0: disabled • 1: auto-negotiate • 2: 10Mbps half-duplex Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 93 • 0–255 characters. PKCS12_PASSWD_RETRY Specifies the number of attempts allowed for password entry. Available values are: • 3: (Default) • 0–100 Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 94 Value Operation • 0: Local procedures can be used (default). • 1: Local procedures cannot be used. Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 95 • 8: Very Long (2000ms) without user option. • 9: No Repeat without user option. PROVIDE_LOGOUT Specifies if user can log out from the phone. Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 96 5: Packet loss is > 2% or round trip network delay is > 480ms or jitter compensation delay is > 100ms Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 97 • 3: The tone volume is 35dB below the transmit audio level. • 4: The tone volume is 30dB below the transmit audio level. Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 98 60. A value of zero means that DHCP will try forever and there will be no reuse. Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 99 • 0: No • 1: Yes RTCPCONT Specifies if the sending of RTCP is enabled. • 0: No • 1: Yes Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 100 If an image file is downloaded based on the LOGOS and CURRENT_LOGO parameter, it is Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 101 In third-pary call control setup, only one SIP controller is supported. SIPCONFERENCECONTINUE Specifies if a conference call continues after the host hangs up. Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 102 Specifies the time in milliseconds and is an estimate of the maximum duration for a message to remain in the network. Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 103 SLA Monitor agent to receive discovery and test request messages. Valid values are 6000 through 65535. The default value is 50011. Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 104 SNMPADD Null Specifies a list of source IP addresses from which SNMP query messages will be accepted and processed. Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 105 1: One-way speaker (also called monitor) enabled. 2: Full (two-way) speakerphone enabled. SSH_ALLOWED Specifies if SSH is supported. Value Operation 0: Disabled Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 106 The message is an HTTP GET for the Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 107 TEAM_BUTTON_REDIRECT_IND Specifies if the redirection indication must be ICATION shown on a team button on the monitored station, if Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 108 A URI received in a push request is only used to obtain push content, if it matches one of these values. The list can contain up to 255 characters. Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 109 Valid values are 5 through 60. VLANSEPMODE Specifies whether VLAN separation is enabled or disabled. Value operation: • 0: Disabled • 1: Enabled Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 110 Un-registration includes termination of registration and all active dialogs. Valid values are 4 through 3600. Table continues… November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 111 Valid values are zero or more IP addresses in dotted-decimal or DNS format, separated by commas without intervening spaces, to a maximum of 255 ASCII characters. November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 112 .............42 phone ................40 cloud configurations IP configuring MAC address file ............802.1Q ................55 phone setup process ............ DNS server ..............November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 113 J129 IP phone ..............hardware .................9 LLDP ................25 support .................67 security configurations ..........48 TCP ports ................29 phone TLV impact wall mounting ..............39 November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...
- Page 114 VLAN settings ..........VLAN tagging automatic failback ............22 voice VLAN data VLAN ..............wall mounting wall mount bracket, wall plate ........39 November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup Comments on this document? infodev@avaya.com...