Avaya J100 Series Installing And Administering page 137

Name
Contact Name display logic
LDAP contacts
Enable LDAP Search
User Name
User Password
Server Address
Server Port
Search Base
Protocol
Authentication
April 2020
Description
Specifies how to match a dialed string on an incoming call with
the users contacts.
The options are:
• Match the number completely (default)
• Match shorter number completely to the rightmost digits
• Match at least 4 rightmost digits
Specifies whether the LDAP Directory feature is enabled on the
phone. If LDAP Directory is enabled, users can select it as a
contact search source. When LDAP is enabled, other contact
search sources become disabled.
The options are:
• Enable
• Disable (default)
The LDAP contacts feature is not available in CCMS mode.
Specifies an LDAP client user name. The default value is
empty.
Specifies an LDAP client password. The default value is empty.
Specifies the IP address or a fully qualified domain name
(FQDN) of the LDAP directory server. The valid value is an IPv4
or IPv6 address in the dotted decimal format or a FQDN.
Specifies the port number for the LDAP directory server. Valid
values are positive integers from 1 to 65535. The default value
is 389.
Specifies LDAP search base parameters. Valid value is a string
of parameter settings, separated by commas. For example,
dc=global,dc=avaya,dc=com. The default value is empty.
Specifies whether to use TLS or TCP protocol for LDAP.
The options are:
• Use TLS (default)
• Use TCP
Specifies the kind of authentication that is used if the value of
the DIRUSERNAME parameter is not null.
Value operation:
• 0: Simple LDAP authentication.
• 1: Simple LDAP Authentication and Security Layer (SASL).
Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
Configuring the phone using the web interface
of longer number
environment
Table continues...
137