Avaya J100 Series Installing And Administering page 438

Customizable parameters
Parameter name
SCA<n>_MAX_CALL_APPEARANCES
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
Default value
1
environment
Description
Specifies the maximum
number of simultaneous
calls on each specified
shared line on BroadSoft
server. <n> can be a
number of 1 to 8 for SCA
mode.
This set of parameters
provides independent
control of the maximum
number of call sessions on
each shared line. This
setting directly maps to the
number of shared call
appearances that are be
displayed on the phone for
this shared line.
Ring Central Server
supports only 1 call
appearance for each
shared line. Even if the
value is set otherwise, the
server ignores it.
Values ranges from 1 to 5.
Note:
These parameters
are supported only by
Avaya J139 IP
Phone, Avaya J159
IP Phone and Avaya
J169/J179 IP Phone.
Table continues...
438