Avaya J100 Series Installing And Administering page 408

Customizable parameters
Parameter name
PHY2VLAN
PKCS12_PASSWD_RETRY
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
Default value
0
3
environment
Description
Specifies the value of the
802.1Q VLAN ID used by
frames forwarded to and
from the secondary
(PHY2) Ethernet interface
when VLAN separation is
enabled.
Valid values are 0 through
4094.
Note:
The parameter is
configured through
the following:
• SET command in a
settings file
• LLDP
Specifies the number of
retries for entering
PKCS12 file password. If
user failed to enter the
correct PKCS12 file
password after
PKCS12_PASSWD_RET
RY retries, then the phone
will continue the startup
sequence without
installation of PKCS12 file.
Valid values are from 0 to
100.
Value operation:
• 0: No retry
Table continues...
408