Avaya J100 Series Installing And Administering page 448

Customizable parameters
Parameter name
SIG_PORT_LOW
SIG_PORT_RANGE
SIGNALING_ADDR_MODE
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
Default value
1,024
64,511
4
environment
Description
Specifies the minimum
port value for SIP
signaling.
Valid values are 1,024
through 65,503.
Specifies the range or
number of SIP signaling
ports. This value is added
to SIG_PORT_LOW to
determine the upper limit
of the SIP signaling port
range.
Valid values are 32
through 64,511).
Specifies the SIP
controller IP address from
SIP_CONTROLLER_LIST
_2. This parameter is used
by SIP signaling on a dual
mode phone.
The single IPv4 mode
phone ignores
SIGNALING_ADDR_MOD
E and
SIP_CONTROLLER_LIST
_2 and selects the SIP
controller's IP addresses
from
SIP_CONTROLLER_LIST
.
The single IPv6 mode
phone ignores
SIGNALING_ADDR_MOD
E and
SIP_CONTROLLER_LIST
and selects the SIP
controller's IPv6
addresses from
SIP_CONTROLLER_LIST
_2.
Value operation:
• 4: IPv4
• 6: IPv6
Table continues...
448