Setting Site Specific Option Number (Sson); Accessing The View Menu - Avaya J100 Series Installing And Administering

Setting Site Specific Option Number (SSON)

About this task
The Site Specific Option Number (SSON) is used by the phones to request information from a
DHCP server. This number must match a similar number option set on the DHCP server. The
number option set on the DHCP server defines the various settings required by the phone.
Procedure
1. Press Main Menu > Administration.
2. In the Access code field, enter the administation menu password.
3. Press Enter.
4. Select SSON.
5. In the SSON field, enter the new SSON.
The number must be between 128 to 254.
6. Press Save.
Caution:
Do not perform this procedure if you are using static addressing. Perform this
procedure if you are using DHCP addressing and the DHCP option number is changed
from the default number.

Accessing the View menu

About this task
Use this procedure to view the parameters associated with the administration procedures.
Procedure
1. Navigate to Main Menu > Admin.
2. In the Access code field, enter the Administration menu password, and press Enter.
3. Scroll to View, and press Select.
View field description
Setting
Model
SW version
April 2020
Description
The model of the phone that is
set by factory procedures.
The version of the software.
Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
Configuring the phone using Administration menu
Associated Configuration
Parameter
MODEL
environment
Table continues...
89