Avaya J100 Series Installing And Administering page 351

Parameter name
ENABLE_AUTO_ANSWER_SUPPORT
ENABLE_AVAYA_ENVIRONMENT
ENABLE_BLIND_TRANSFER
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
Default value
0
1
1
environment
List of configuration parameters
Description
Specifies that the auto-
answer feature is enabled.
Value operation:
• 0: Disabled
• 1: Enabled
Note:
This parameter is
only applicable if an
Open SIP
environment is
configured.
Specifies whether the
phone is configured to be
used in an Avaya or an
Open SIP proxy
environment.
Value operation:
• 0: Configured for a third-
party proxy with
SIPPING 19 features.
• 1: Configured for Avaya
with AST features .
Note:
Set the parameter to
0 for an Open SIP
environment.
Specifies that whether the
blind transfer is enabled or
not.
Value operation:
• 0: Disabled.
• 1: Enabled.
Note:
Avaya J129 IP Phone
does not support this
feature.
Table continues...
351