Avaya J100 Series Installing And Administering page 364

Customizable parameters
Parameter name
ENTRYNAME
ESCALATE_FAC
EVENT_NOTIFY_AVAYA_MAX_USERS
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
Default value
0
Null
20
environment
Description
Specifies if the calling
party name, or the VDN or
the skill name must be
used in History entries.
Value operation:
• 0: Calling Party Name is
used.
• 1: VDN or the skill name
is used.
Note:
Avaya J129 IP Phone
does not support this
parameter.
Specifies the Feature
Access Code to invoke
Escalation feature.
Note:
This parameter is
available in
• Avaya J159 IP
Phone
• Avaya J169/J179
IP Phone
Specifies the maximum
number of users to be
included in an event
notification message from
CM/AST-II .
Valid values are 0 through
1,000.
This parameter is used
only for development and
debugging purposes.
Table continues...
364