Avaya J100 Series Installing And Administering page 435

Parameter name
RTCPMONPERIOD
RTCPMONPORT
RTP_PORT_LOW
RTP_PORT_RANGE
S
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
Default value
5
5,005
5,004
40
environment
List of configuration parameters
Description
Specifies the interval, in
seconds, for sending out
RTCP monitoring reports.
Valid values are from 5 to
30 seconds.
Specifies the RTCP
monitor port number.
You can set this parameter
only if the environment is
not an Avaya environment.
The values can range from
0 through 65,535. Default
is 5,005.
Specifies the lower limit of
the UDP port range to be
used by RTP or RTCP
connections.
The values can range from
1,024 through 65,503.
Specifies the range or
number of UDP ports
available for RTP or RTCP
connections
This value is added to
RTP_PORT_LOW to
determine the upper limit
of the UDP port range.
The values can range from
32 through 64,511.
Table continues...
435