Avaya J100 Series Installing And Administering page 229

Parameter name
DIRSRVRPRT
DIRTOPDN
DIRSECURE
April 2020
Default value
389
Null
1
Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
Description
Specifies the port number for the
LDAP directory server.
Valid values are positive integers
from 1 to 65535.
For example,
SET DIRSFVFRT 389
Specifies the LDAP search base.
For example,
SET DIRTOPDN
"dc=global,dc=avaya,dc=com"
Specifies whether to use TLS or
TCP for the LDAP server.
Value operation:
• 0: Use TCP
• 1: Establish TLS connection
using the STARTTLS extended
operation.
• 2: Establish TLS connection
using the Secure LDAP protocol
(LDAPS)
For example,
SET DIRSECURE 1
There is a difference between
STARTTLS and LDAPS:
STARTTLS uses the same port
as the LDAP protocol. The
DIRSRVRPRT parameter value
must be the same as the port
configured for the LDAP (not for
LDAPS) protocol on the server
side.
The LDAPS protocol uses a port
different from LDAP. The value for
DIRSRVRPRT needs to
correspond to server port for the
LDAPS connection.
environment
Feature configuration
Table continues...
229