Avaya J100 Series Installing And Administering page 484

Customizable parameters
List of Wi-Fi configuration parameters
Parameter Name
WIFISTAT
ENABLE_NETWORK_CONFIG_
BY_USER
WLAN_ESSID
WLAN_SECURITY
April 2020
Default Value
1
1
N/A
none
Installing and Administering Avaya J100 series IP Phones in an Open SIP
Comments on this document? infodev@avaya.com
Description
Specifies the network interface to
be used for network connectivity.
Value operation:
• 0: Phone connects to only
Ethernet network.
• 1: Phone connects to Ethernet
network, unless manually
switched to Wi-Fi
• 2: Phone connects to the Wi-Fi
network with the SSID defined
in the 46xxsettings.txt
parameter WLAN_ESSID
Enables network configuration to
be modified by the user.
Value operation:
• 0: Disabled
• 1: Enabled
Specifies the wireless network to
be used.
The name of the SSID ranges up
to 32 characters.
Specifies the security standard to
be used for the wireless network.
Value operation:
• none: No security standard is
defined.
• wep: WEP security standard is
defined.
• wpa2psk: WPA2 security
standard with pre-shared key is
defined.
• wpapsk: WPA security standard
with pre-shared key is defined.
• wpa2e: WPA enterprise security
standard is defined.
environment
Table continues...
484